Grace Continuum II - Page 14

14
Install corner braces onto the rear corners of the frame with four M8 x 16 mm SBHCS
screws each and the 5 mm Allen wrench.
9
Building the Frame Table (Continued)
Full Frame Assembly
Install a middle brace onto the front and back of the middle leg with six M8 x 16 mm
SBHCS screws each and the 5 mm Allen wrench.
8
Middle Brace (x2)
M8 x 16 mm
SBHCS (x12)
Corner
Brace (x2)
M8 x 16 mm
SBHCS (x8)
Line up the two table sections and use two M8 x 16 mm SBHCS screws to attach the right
table section to the middle leg. Tighten with the 5 mm Allen wrench.
M8 x 16 mm
SBHCS (x2)
10