Grace Continuum II - Page 28

28
5
Repeat steps 1-4 with the remaining rails. One rail will be completed with the handwheel rail
section in place of the ratcheting rail section.
Insert one of the rail’s ratchet section end into the front rail arm (ratcheting side).
6
Press the other end of the rail (the non-ratchet rail side) into the front rail arm (non-
ratcheting side).
7
Full Frame Assembly
Installing the Rails (Continued)
Front Rail Arm
(Ratcheting)
Ratchet Section
Non-ratchet
Rail
Front Rail Arm
(Non-ratcheting)