43
Carefully lift the table to a standing position.
5
Install the corner braces onto the rear of the left and right frame legs with eight M8 x 16
mm SBHCS screws and the 5 mm Allen wrench.
6
Corner Brace (x2)
M8 x 16 mm
SBHCS (x8)
Crib Frame Assembly
Building the Frame Table (Continued)
Note: Keep table and leg as square as possible while attaching brace.
Pull the bottom of the left and right legs out, away from the center, to help square up the
frame.
7
To Next Page
Loading...
