90
Parts & Tools Needed:
Instructions
Timing your machine aligns the needle and hook assembly so that they are in the correct places
during the creation of a stitch. Improper timing can result in damage to the machine and needle, or
make sewing impossible. Please consult with a Grace Company support technician before attempting
to adjust the timing on your machine.
Please speak to a Grace Company
support technician before
attempting these instructions.
Part Four | Repairs and Diagnostics
1. Power o the machine and raise the needle
to the highest position using the hand
wheel.
Hand Wheel
1
1. Remove the needle plate (see page 78).
2. Remove the bobbin case from the hook
assembly (see page 28).
2
3
1. Look into the machine’s timing cut-out and
turn the hand wheel. The hook assembly
will rotate.
Timing
Cut-out
Hook
Assembly
4
Flat-head Screwdriver
Tools Box
2 mm
T-handle Allen
Wrench 2 mm
Tools Box
Timing Spacer Tool
Tools Box
Timing the Machine
To Next Page
Loading...
Need help?
General
