25
Task 8 - Winding a Bobbin
Part Three | Preparing to Quilt
Parts & Tools Needed:
Bobbin (Class M)
Instructions
Your machine comes with two bobbins pre-wound with 50 weight polyester Finesse thread. An empty
M-class bobbin has also been provided. It’s important to choose bobbin thread that is similar in type
and quality as the top thread. For more information on choosing thread, see “Choosing Your Thread”
on page 97.
Note: This machine uses cone-style thread. Unless you have the spool accessory, please use only
thread cones for this machine.
The following diagram outlines the path the thread (shown in blue) must take to wind the bobbin.
Place an empty bobbin
onto bobbin stand
1
2
3
4
5
6
Box 1
1. Thread Stand
2. Guide Loops
3. Bobbin Thread Guide
4. Tensioner Thread Guide
5. Bobbin Thread Tensioner
6. Bobbin Stand with Bobbin
1
2
3
4
5
6
To Next Page
Loading...
Need help?
General
