68
Part Four | Maintaining the Machine
Parts & Tools Needed:
Instructions
Take the following steps to prepare the oil bottle
for use in oiling the machine.
1. Snip o about 1/4th of an inch from the tip
of the plastic lid with a pair of scissors.
2. Place the applicator needle onto the top of
the cap.
3. Peel the safety foil o the opening of the oil
bottle.
4. Carefully screw the lid onto the oil bottle.
5. Hold bottle upside down and squeeze gently
to apply oil. When not in use, cover the
applicator needle with the safety cap.
(Not included)
ScissorsOil Bottle
Power Cord/Oil Bottle
Box
1
2
3
4
5
Preparing the Oil Bottle
To Next Page
Loading...
Need help?
General
