22
Instructions
The power cable port and power switch are located on the back of the machine. To power on the
machine, take the following steps:
Parts & Tools Needed:
Part Three | Out of Box Assembly
1. Find the power cord in the power cord/oil
bottle box that you removed earlier.
1. Move the power cable retainer (blue) to
the side and plug the power cord into the
back of the machine.
2. Press the power cable retainer (blue)
rmly onto the power cable.
3. Press the power switch up to turn the
machine on.
1
2
3
4
Power Cord
Power
Switch
Power Cord/Oil
Bottle Box
Task 7 - Turning the Machine On/O
Zip Tie
Encoder Box
Note: Zip tie required for
Cutie frame users only.
Power Cord
Power Cord/
Oil Bottle Box
To Next Page
Loading...
Need help?
General
