37
Congratulations! You have completed Part Three of this manual.
If you are assembling a new frame, turn to Part Three of your
frame manual. If your frame manual is not broken into parts, follow
the manual’s directions to:
• Install and adjust the rails
• Install frame handwheel (if applicable)
• Install the bungee clamps (if applicable)
• Adjust the carriage stop (Cutie Frame only)
• Level the frame
If you are not assembling a new frame but are installing
QuiltMotion onto your frame, turn to Part Three of your QuiltMotion
manual.
If you are installing your machine onto a frame that is already fully
assembled and are not installing QuiltMotion at this time, continue
to Part Four of this manual on page 38.
Part Three | Preparing to Quilt
To Next Page
Loading...
Need help?
General
