81
3
Place the spring inside the bobbin at an angle and press the tabs that are closer together into
their slot on the side.
Tabs
Slot
Press the other side of the spring down and insert the other tabs on the other side. Use the
small at-head screwdriver to make sure all four tabs are fully secured.
4
Place the bobbin in the bobbin case. The anti-backlash spring should hold the bobbin so that it
barely pokes out of the opening of the bobbin case.
5
Bobbin
Reinstalling the Anti-Backlash Spring (continued)
Part Four | Maintaining the Machine
To Next Page
Loading...
Need help?
General
