Grace Qnique 19 User Manual

Set up the frame before
assembling the machine.
Parts & Tools Needed:
Out-of-the-Box Assembly
Instructions
The machine wheels move the machine across the bottom carriage. To install the machine wheels:
Installing the Wheels
Back Wheel
Base Assembly
Set Screw
1. Place the back wheel base assembly
under the rear of the machine with the set
screws facing the rear.
1
1. Screw in place with two SBHCS M6 x 20
mm screws and the 4 mm Allen wrench.
2
SBHCS Screw
M6 x 20 mm (x2)
Front Wheel Base
Assembly
Back Wheel Base
Assembly
Shoulder Bolt
M6 (x2)
SBHCS Screw
M6 x 20 mm (x2)
T-handle Allen
Wrench 4 mm
4 mm
• Tape Measure (not included)
13

Grace Qnique 19 Specifications

General

Brand	Grace
Model	Qnique 19
Category	Sewing Machine
Language	English