Grace Qnique 19 User Manual

43
Using the Cruise Quilting Mode
In cruise mode, the quilting machine maintains the length of the stitch despite the speed and
direction of the quilter’s movements. However, the machine will continue to stitch in place (at the
minimum speed) if the quilter stops moving the machine.
To switch to a dierent quilting mode, press the next quilting mode icon .
STOP
Regulated
Precise
Jog
Needle
12
SPI
STOP
Regulated
Cruise
Jog
Needle
25%
Min Speed
12
SPI
Settings
Stitch Length
Jog Needle
Needle Stop
Position
Next Quilting
Mode
Over-speed
Indicator
Stitch Button
Minimum Speed
To quilt in the regulated cruise quilting mode, take the following steps:
1. Conrm that the stitch length, measured in stitches per inch (SPI), is the desired length.
Note: To switch to stitches per centimeter (SPC), go to the Settings menu (see page 27).
• Press to reduce the number of stitches per inch and increases stitch length.
• Press to increase the number of stitches per inch, which decreases stitch length.
2. Determine the minimum speed the machine will stitch at when stitching is active but the
machine is not being moved. This can be set from 5% to 25% of the machine’s top speed.
• Decreases the minimum speed.
• Increases the minimum speed.
STOP
Regulated
Precise
Jog
Needle
12
SPI
STOP
Regulated
Precise
Jog
Needle
12
SPI
STOP
Regulated
Precise
Jog
Needle
12
SPI
STOP
Regulated
Precise
Jog
Needle
12
SPI
Quilting
1
2

Grace Qnique 19 Specifications

General

Brand	Grace
Model	Qnique 19
Category	Sewing Machine
Language	English