Grace Qnique 19 User Manual

20
Parts & Tools Needed:
Instructions
The thread stand assembly is installed onto the top of the right side of the machine. Take the
following steps:
Attaching the Thread Mast
SBHCS Screw
M4 x 8 mm (x2)
Thread Stand
Assembly
1. Slide the thread stand assembly over the screw holes on the machine.
Thread Stand
Assembly
SBHCS Screw
M4 x 8 mm (x2)
2. Use the 2.5 mm Allen wrench to screw in two SBHCS M4 x 10 mm screws.
Note: It may be necessary to push back the foam on the thread stand for this step.
1
2
Out-of-the-Box Assembly
2.5 mm
T-handle Allen
Wrench 2.5 mm

Grace Qnique 19 Specifications

General

Brand	Grace
Model	Qnique 19
Category	Sewing Machine
Language	English