40
Using the Handlebar Controls
When rst turned on, the machine starts in regulated precise quilting mode and can start quilting
right away. Please take a moment to review the handlebar controls used when quilting. While in the
Settings menu, System Information screen, or Screen Settings menu, some buttons have a dierent
purpose or do not function (see page 27 for details).
Note: Left-handed quilters may prefer to reverse these buttons. This can be done in the Settings
menu (see page 27).
1
3
4
5
62
1. Change Quilting mode: Press to cycle through the quilting modes: regulated precise,
regulated cruise, baste, and manual.
2. Settings: This button opens the Settings menu.
3. Single Full Stitch or Half-stitch
• Press to create a single full stitch or a half-stitch, based upon settings (see page 27).
4. Start/Stop Quilting: Press to start or stop stitching.
5. Increase: This button increases the number, size, or speed of the stitching, depending upon
the quilting mode. For example, in precise quilting mode, this button increases the number of
stitches the machine makes per inch (SPI) or per centimeter (SPC).
6. Decrease: This button will decrease the number, size, or speed of the stitching depending
upon the quilting mode.
1
4
5
6
2
3
Quilting
To Next Page
Loading...
Need help?
General
