Grace Qnique 19 User Manual

71
Removal Instructions
The hook holder keeps the hook assembly in place. The following procedure should only be
attempted if determined necessary by a Grace Company support technician. If done incorrectly,
major machine problems can result. Please call (800) 264-0644 before attempting this procedure.
1. Turn o the machine.
Reinstalling the Hook Holder
Parts & Tools Needed:
Please speak to a Grace Company
support technician before
attempting these instructions.
Flat-head Screwdriver
T-handle Allen
Wrench 3 mm
3 mm
Hook Holder
Screw
2. Rotate the hand wheel to raise the needle
to the highest point.
Hook Holder
3. Press in on the hook assembly cover and
down to open it.
4. With the 3 mm Allen wrench, remove the
hook holder screw (shown in gray) that
attaches the hook holder to the machine.
5. The hook holder will slide free of the
machine.
1
42
3 5
Hand
Wheel
Repairs and Diagnostics

Grace Qnique 19 Specifications

General

Brand	Grace
Model	Qnique 19
Category	Sewing Machine
Language	English