56
Parts & Tools Needed:
Changing the Needle
Needle Needle Magnet
Instructions
A broken, bent, or burred needle may break thread, damage fabric, or even damage the machine.
Always check that the needle is in good repair before starting a new project, and replace the needle
after eight hours of use.
Straight Needle
Bent Needle
To avoid damage to the machine, please choose an approved needle style from the list below:
• 135x5
• DPx5
• 134
• 135x7
• 797
• SY 1955
Maintaining the Machine
To change the needle, take the following steps:
1. Power o the machine.
For information on selecting a
needle, see page 78.
2. Raise the needle to the highest position with
the hand wheel.
3. Loosen the needle thumb screw. If
needed, use a at-head screwdriver.
Needle
Thumb Screw
Hand
Wheel
1
2 3
To Next Page
Loading...
Need help?
General
