Grace Qnique 19 User Manual

47
10
50 90
STOP
Manual
Jog
Needle
80%
Settings
Speed
Jog Needle
Needle Stop
Position
Speed Preset
Next Quilting
Mode
Over-speed
Indicator
Stitch Button
Using the Manual Quilting Mode
In this quilting mode, the machine produces stitches at a constant speed. It’s up to the quilter to
move the machine the distance needed to get the desired stitch length. This mode is useful for small,
continuous stippling patterns.
To switch to a dierent quilting mode, press the next quilting mode icon .
STOP
Regulated
Precise
Jog
Needle
12
SPI
To quilt in the regulated cruise quilting mode, take the following steps:
1. Conrm that the stitch speed is the desired speed. The stitching speed is displayed as a
percentage of the maximum machine speed of 2000 stitches-per-minute.
• Press to reduce stitching speed.
• Press to increase stitching speed.
2. Establish your speed presets. Selecting a preset adjusts the machine’s speed to the percent
indicated. To customize a preset, rst set the machine to the desired speed. Then press and
hold the preset you’d like to change for three seconds. It will update to the new speed.
Example: In the display shown above, holding down the “10” preset button for three seconds
would update that button to “80,” the current stitching speed.
STOP
Regulated
Precise
Jog
Needle
12
SPI
STOP
Regulated
Precise
Jog
Needle
12
SPI
Quilting
1
2

Grace Qnique 19 Specifications

General

Brand	Grace
Model	Qnique 19
Category	Sewing Machine
Language	English