Grace Qnique 19 User Manual

32
Note: If the bobbin is installed correctly, it turns clockwise when the thread is pulled.
Preparing to Quilt
7. Test the tension of the bobbin case every time bobbin thread is changed; bobbin tension is the
foundation for correct thread tension.
a. Place the bobbin case on its side, on your palm.
b. Pull up on the thread. The thread should run freely and the bobbin should rise into a vertical
position without lifting o your hand.
• If the bobbin case remains on its side, there is too little tension. Turn the large screw
(shown below in blue) clockwise.
• If the case lifts into the air, there is too much tension. Turn the large screw (shown
below in blue) counter-clockwise.
Too Much TensionCorrect TensionToo Little Tension
7
Loading the Bobbin Case (Continued)

Grace Qnique 19 Specifications

General

Brand	Grace
Model	Qnique 19
Category	Sewing Machine
Language	English