Pressure Relief Procedure
3B0070C 17
Pressure Relief Procedure
Follow the Pressure Relief
Procedure whenever you see this
symbol.
1. Engage the trigger lock.
2. Turn ON/OFF switch to the OFF
position.
3. Turn pressure control to the OFF
position.
4. Put drain tube in a pail and turn prime
valve down to relieve pressure. Leave
prime valve in the down (drain) position
until you are ready to spray again.
This equipment stays pressurized until
pressure is manually relieved. To help
prevent serious injury from pressurized
fluid, such as skin injection, splashed fluid
and moving parts, follow the Pressure
Relief Procedure whenever you stop
spraying and before cleaning, checking,
or servicing the equipment.
To Next Page
Loading...
