Digital Display
3B0070C 29
Digital Display
All models are equipped with a digital
display. This section explains how to use this
feature.
Operation Main Menu
A short press of the menu button moves to
the next display. Press and hold menu button
to change units or reset data.
1. Perform Pressure Relief Procedure,
page 17.
2. Turn ON/OFF switch to OFF position.
3. Plug sprayer into grounded outlet. Turn
ON/OFF switch to ON position.
4. To change pressure units (psi, bar, or
MPa), press and hold menu button until
the desired units appear (approximately
10 seconds). Selection of bar or MPa
changes gallons to Liters x10.
5. Pressure display appears. Dashes
appear when pressure is less than 50 psi
(3 bar, 0.3 MPa).
6. Short press menu button to move to Job
Gallons (or Liters x 10).
NOTE: JOB displays briefly, then the
number of gallons sprayed.
To Next Page
Loading...
