Cleanup
3A5085C 27
10. Cover cup fitting (2a) with a rag, shake
the entire FlexLiner System for a
minimum of ten seconds.
11. Wipe clean and dry all components of
FlexLiner System. Properly dispose of
cleaning fluid.
Cleaning Siphon Cup
1. Perform Pressure Relief Procedure,
page 10.
2. Disconnect gun from siphon cup.
3. Unlatch and remove cup cover from
siphon cup. Return excess fluid to
original container.
4. Wipe excess fluid from cup, cover and
siphon tube.
5. Fill cup quarter-full with cleaning fluid
(warm water or appropriate solvent).
6. Latch cover to cup.
7. Cover cup fitting with a rag. Shake cup
assembly for a minimum of ten seconds.
8. Wipe clean and dry all components of
siphon cup assembly. Properly dispose
of cleaning fluid.
ti30779a
To Next Page
Loading...
