Shutdown and Cleaning
22 3A0248C
12. To preserve paint in hose:
a. Point gun into paint pail.
b. Unlock gun trigger lock.
c. Pull and hold gun trigger.
d. Lower prime/spray valve to SPRAY.
e. Turn power switch ON.
f. Continue to hold gun trigger until you see paint
diluted with flushing fluid starting to come out of
gun.
13. While continuing to trigger gun, quickly move gun to
redirect spray into waste pail. Continue triggering
gun into waste pail until flushing fluid dispensed
from gun is relatively clear.
14. Stop triggering gun. Engage the trigger lock.
15. Lift prime/spray valve to PRIME.
16. Turn power switch OFF.
17. Clean InstaClean Fluid Filter and gun, page 24.
18. Fill unit with Pump Armor
™
storage fluid. Read Long
Term Storage, page 25.
o preserve paint in hose, trigger gun into paint pail
to expel the remaining paint.
NOTE: Step 12 is for returning paint in hose back to
paint pail. One 50-ft hose holds approximately 1-quart
(1-liter) of paint.
ti8909a
ti13960a
ti5580a
ti12942a
ti8908a
ti13961a
ti2018a
To Next Page
Loading...
Need help?
General
