Storage
3A0248C 25
Storage
Short Term Storage
(up to 2 days)
1. Relieve pressure, page 14.
2. Leave suction tube and prime tube in paint pail.
3. Cover paint pail and hoses tightly with plastic wrap.
4.
a. Engage trigger lock.
b. Leave gun attached to hose.
c. If you have not already cleaned them, remove
tip and guard from gun and clean with water or
flushing solvent. A soft brush can be used to
loosen and remove dried on material if needed.
d. Wipe paint off outside of gun using a soft cloth
moistened with water or flushing solvent.
Long Term Storage
(more than 2 days)
1. Place suction tube in Pump Armor storage fluid bot-
tle and prime tube in waste pail.
2. Lift prime/spray valve to PRIME.
3. Turn power switch ON.
ti14964a
ti14965a
ti8908a
ti9671a
• Always circulate Pump Armor storage fluid through
system after cleaning. Water left in sprayer will cor-
rode and damage pump.
• Follow Shutdown and Cleaning, page 21, or Power
Flush Cleaning, page 23.
ti2057a
ti13961a
ti5580a
To Next Page
Loading...
Need help?
General
