Storage
26 3A0248C
4. Turn pressure control knob clockwise until the pump
turns on.
5. When storage fluid comes out of prime tube (5-10
seconds) turn power switch OFF.
6. Lower prime/spray valve to SPRAY to keep storage
fluid in sprayer during storage.
Stowing Sprayer
1. Screw inlet screen onto
suction tube.
2. Coil hose. Leave it con-
nected to sprayer. Wrap
hose around hose wrap
bracket.
3. Secure a plastic bag
around suction tube to catch
any drips.
4. Store sprayer indoors.
NOTICE
• To prevent damage to the equipment, make sure all
water is drained out of sprayer and hoses before
storing.
• Do not allow water to freeze in sprayer or hose.
• Do not store sprayer under pressure.
ti12949a
ti2018a
ti13960a
ti9433a
ti14966a
ti5552a
To Next Page
Loading...
Need help?
General
