Graco Project Painter Plus 257025 - Specifications

Specifications
3A0248C 9
Specifications
This equipment is not intended for use with flammable or combustible materials used in places such as cabinet
shops or other “factory”, or fixed locations. If you intend to use this equipment in this type of application, you must
comply with NFPA 33 and OSHA requirements for the use of flammable and combustible materials.
Model Name Series
Dispense
Rate gpm
(lpm)
Hose Length
and Diameter
Maximum
Hose Length
Gun
Model
Maximum
Working
Pressure
PSI MPa bar
Project
Painter Plus
A
0.24 gpm
(0.91 lpm)
1/4 in. x 25 ft
(6.4 mm x 7.5 m)
50 ft (15 m) SG2 2800 19 193