Graco SlimFit3 LX User Manual

Vehicle Information
10
101
Review your vehicle’s owner manual for vehicle seat belt use
Vehicle Seat Belt Terms
10-D Vehicle Seat Belts
This car seat can be installed using a vehicle seat belt. To do this, you will need
to change the seat belt to a locked mode for use with car seats. With some
vehicle seat belts, this is done with the latchplate; with other vehicle seat belts,
this is done with the retractor.
Retractor
A device that winds up the unused vehicle seat
belt. It is often hidden inside the panels on the
walls of the vehicle or in the vehicle seatback.
Latch Plate
The male end of the seat belt with
the silver tongue.
Seat Bight
The crease where the vehicle seat back
and seat bottom meet.
NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 101NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 101 9/18/20 11:50 AM9/18/20 11:50 AM

Graco SlimFit3 LX Specifications

General

Product Type	3-in-1 Car Seat
Rear-Facing Weight Capacity	5-40 lbs
Forward-Facing Weight Capacity	22-65 lbs
Booster Mode Weight Range	40-100 lbs
Height Capacity	Up to 57 inches
Harness Type	5-point harness
Harness Positions	10
Side Impact Protection	Yes
Cup Holders	2
Machine Washable Cover	Yes
Weight Capacity	5-100 lbs
Installation	LATCH
Recline Positions	4