Graco SlimFit3 LX User Manual

Care & Cleaning
11
109
Refer to seat pad care tag for washing instructions.
Headrest Pad
Clean with a damp sponge using mild soap and cool
water. If needed, pad may be removed for cleaning.
To remove, unsnap the 2 snaps on the front and the
2 snaps on the back of the headrest pad from plastic
shell.
Unhook plastic tab below the Height Adjust Lever
and remove the pad.
Machine wash pad in cold water on delicate cycle
and drip-dry. DO NOT USE BLEACH.
Reverse the steps to reattach the pad on the
headrest.
11-A Cleaning Rapid Remove Seat Pad
NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 109NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 109 9/18/20 11:50 AM9/18/20 11:50 AM

Graco SlimFit3 LX Specifications

General

Product Type	3-in-1 Car Seat
Rear-Facing Weight Capacity	5-40 lbs
Forward-Facing Weight Capacity	22-65 lbs
Booster Mode Weight Range	40-100 lbs
Height Capacity	Up to 57 inches
Harness Type	5-point harness
Harness Positions	10
Side Impact Protection	Yes
Cup Holders	2
Machine Washable Cover	Yes
Weight Capacity	5-100 lbs
Installation	LATCH
Recline Positions	4