Graco SlimFit3 LX User Manual

Rear Facing with Seat Belt
4-B
38
1. Store Tether Strap
and Lower Anchor
Attachment in
Storage Locations
Attach tether hook to
the plastic bar on either
side of the car seat.
Lift seat pad and store
lower anchor strap and
connectors in the storage location as shown.
4-B Install Rear-Facing with
Vehicle Seat Belt
2. Recline the Car Seat
Pull out the handle on the front of the car seat
and adjust to one of the two rear-facing car seat
positions.
Visit www.gracobaby.com
and the Graco
®
SlimFit3™
LX car seat product page
to view installation videos.
RECLINE POSTIONS
NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 38NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 38 9/18/20 11:49 AM9/18/20 11:49 AM

Graco SlimFit3 LX Specifications

General

Product Type	3-in-1 Car Seat
Rear-Facing Weight Capacity	5-40 lbs
Forward-Facing Weight Capacity	22-65 lbs
Booster Mode Weight Range	40-100 lbs
Height Capacity	Up to 57 inches
Harness Type	5-point harness
Harness Positions	10
Side Impact Protection	Yes
Cup Holders	2
Machine Washable Cover	Yes
Weight Capacity	5-100 lbs
Installation	LATCH
Recline Positions	4