Rear Facing
with Seat Belt
4-B
42
9. Test For Tightness
Grab the sides of the seat where the vehicle seat
belt is and slide the car seat side-to-side and
front-to-back.
If the seat moves less than 1” (2.5 cm), it is tight
enough.
10. Check the Level Indicator
Vehicle MUST be on level ground. Ball must be
completely in the blue area. Readjust the recline if
needed.
If needed, rolled towels may be placed under the
car seat at the vehicle seat crease, until the base
is completely in the blue area.
See section 6-A to secure your child.
Recheck the level indicator with child in seat.
NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 42NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 42 9/18/20 11:49 AM9/18/20 11:49 AM
To Next Page
Loading...
