Graco SlimFit3 LX User Manual

Vehicle Information
10
32
Getting Started
3-A
32
• For the best 3-across fit, install with the
vehicle seat belt instead of the lower anchor
attachment.
The lower anchor attachment fixes the car
seat to a designated location, making it
difficult to adjust when installing three car
seats across.
Many vehicles do not have lower anchors
for all three seating positions.
• Position and buckle the vehicle seat belts for all
three car seats to determine the best fit before
installing each car seat.
If you are having difficulty accessing the
buckles, shift the car seat out of the
designated seating position then route the
vehicle seat belt through the belt path and
buckle the seat belt. Once buckled,
properly position the car seat
3 Three-Across Installation Tips & Tricks
3-A Getting Started
Vehicle Seat Belt
NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 32NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 32 9/18/20 11:49 AM9/18/20 11:49 AM

Graco SlimFit3 LX Specifications

General

Product Type	3-in-1 Car Seat
Rear-Facing Weight Capacity	5-40 lbs
Forward-Facing Weight Capacity	22-65 lbs
Booster Mode Weight Range	40-100 lbs
Height Capacity	Up to 57 inches
Harness Type	5-point harness
Harness Positions	10
Side Impact Protection	Yes
Cup Holders	2
Machine Washable Cover	Yes
Weight Capacity	5-100 lbs
Installation	LATCH
Recline Positions	4