Graco SlimFit3 LX User Manual

Rear Facing with Seat Belt
4-B
39
3. Place Car Seat Rear-Facing in Back Seat of
the Vehicle
Place rear-facing in vehicle seat. The base should
sit as flat as possible on the vehicle seat.
5. Check the Level Indicator
Vehicle MUST be on level ground. Ball must be
completely in the blue area. Readjust the recline
if needed.
If needed, rolled towels may be placed under the
car seat at the vehicle seat crease, until the base
is completely in the blue area.
4. Make Sure Base is a minimum of 80% on
Vehicle Seat.
NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 39NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 39 9/18/20 11:49 AM9/18/20 11:49 AM

Graco SlimFit3 LX Specifications

General

Product Type	3-in-1 Car Seat
Rear-Facing Weight Capacity	5-40 lbs
Forward-Facing Weight Capacity	22-65 lbs
Booster Mode Weight Range	40-100 lbs
Height Capacity	Up to 57 inches
Harness Type	5-point harness
Harness Positions	10
Side Impact Protection	Yes
Cup Holders	2
Machine Washable Cover	Yes
Weight Capacity	5-100 lbs
Installation	LATCH
Recline Positions	4