Rear Facing
with Seat Belt
4-B
40
Review your vehicle’s owner manual for vehicle seat belt use
6. Route the Vehicle Seat Belt
Thread vehicle seat belt through the rear-facing
belt path (marked with a blue label) and out the
other side. Buckle it. The seat belt should lie as
flat as possible and not be twisted.
Note: It may be easier to route the vehicle seat
belt by lifting seat pad up to expose the belt path.
Make sure the vehicle seat belt is in front of the
buckle strap when the buckle is in the inner-most
or middle position (A), and behind when in the
outer-most position (B) and that it is flat and is
not twisted.
A B
NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 40NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 40 9/18/20 11:49 AM9/18/20 11:49 AM
To Next Page
Loading...
