Graco SlimFit3 LX User Manual

Rear Facing with Lower Anchor Attachment
4-C
45
3. Push the Lower Anchor Connectors Out
Through the Rear-Facing Belt Path Openings
on Each Side of Car Seat
Make sure the lower anchor strap is in front of the
buckle strap when the buckle is in the inner-most
or middle position (A), and behind when in the
outer-most position (B) and that it is flat and is not
twisted.
4. Recline the Car Seat
Pull out the recline handle on the front of the car
seat and adjust to one of the two rear-facing car
seat positions.
A B
RECLINE POSTIONS
NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 45NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 45 9/18/20 11:49 AM9/18/20 11:49 AM

Graco SlimFit3 LX Specifications

General

Product Type	3-in-1 Car Seat
Rear-Facing Weight Capacity	5-40 lbs
Forward-Facing Weight Capacity	22-65 lbs
Booster Mode Weight Range	40-100 lbs
Height Capacity	Up to 57 inches
Harness Type	5-point harness
Harness Positions	10
Side Impact Protection	Yes
Cup Holders	2
Machine Washable Cover	Yes
Weight Capacity	5-100 lbs
Installation	LATCH
Recline Positions	4