Graco SlimFit3 LX User Manual

Forward-Facing with Seat Belt
5-B
54
3. Place Car Seat Forward-Facing in Back
Seat of the Vehicle
Place forward-facing in vehicle seat. The base
should sit as flat as possible on the vehicle
seat.
5. Recline the Car Seat
Pull out the recline handle on the front of the
car seat and adjust to one of the two forward-
facing car seat positions.
RECLINE POSTIONS
4. Make Sure Base is a minimum of 80% on
Vehicle Seat
NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 54NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 54 9/18/20 11:49 AM9/18/20 11:49 AM

Graco SlimFit3 LX Specifications

General

Product Type	3-in-1 Car Seat
Rear-Facing Weight Capacity	5-40 lbs
Forward-Facing Weight Capacity	22-65 lbs
Booster Mode Weight Range	40-100 lbs
Height Capacity	Up to 57 inches
Harness Type	5-point harness
Harness Positions	10
Side Impact Protection	Yes
Cup Holders	2
Machine Washable Cover	Yes
Weight Capacity	5-100 lbs
Installation	LATCH
Recline Positions	4