Graco SlimFit3 LX User Manual

Forward-Facing with Seat Belt
5-B
58
10. Tighten the Vehicle Seat Belt
Press down firmly in the center of the car
seat. Pull on the shoulder belt to tighten.
When the belt is tight, close and lock the lock-
off on top of the vehicle seat belt.
Make sure the lap and shoulder belt are both
routed under the lock-off.
Note: When using the lock-off, you do not
need to switch the retractor. The lock-off locks
the seat belt.
11. Replace the Seat Pad
Move the headrest back to its proper position
for your child.
NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 58NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 58 9/18/20 11:49 AM9/18/20 11:49 AM

Graco SlimFit3 LX Specifications

General

Product Type	3-in-1 Car Seat
Rear-Facing Weight Capacity	5-40 lbs
Forward-Facing Weight Capacity	22-65 lbs
Booster Mode Weight Range	40-100 lbs
Height Capacity	Up to 57 inches
Harness Type	5-point harness
Harness Positions	10
Side Impact Protection	Yes
Cup Holders	2
Machine Washable Cover	Yes
Weight Capacity	5-100 lbs
Installation	LATCH
Recline Positions	4