Configuration via Keypad
To configure the LCD menu using the phone’s keypad, follow the instructions below:
• Enter MENU options. When the phone is in idle, press the round MENU button to enter the
configuration menu.
• Navigate in the menu options. Press the arrow keys up/down/left/right to navigate in the menu options.
• Enter/Confirm selection. Press the round MENU button or “Select” Softkey to enter the selected
option.
• Exit. Press “Exit” Softkey to exit to the previous menu.
• Return to Home page.
In the Main menu, press Home Softkey to return home screen.
In sub menu, press and hold “Exit” Softkey until Exit Softkey changes to Home Softkey, then release
the Softkey.
• The phone automatically exits MENU mode with an incoming call, when the phone is off hook or the
MENU mode if left idle for more than 60 seconds.
• When the phone is in idle, pressing and holding the UP-navigation key for 3 seconds to see the phone’s
IP address, IP setting, MAC address and software address.
The MENU options are listed in the following table.