Grandstream Networks GRP2616 User Manual

Page | 45
GRP261X /GRP2624/GRP2634 User Guide
Version 1.0.5.48
Characters Input
The GRP261x/GRP2624/GRP2634 keypad can be used by tapping on an input field.
GRP261x/GRP2624/GRP2634 keypad has 4 modes “123”, “ABC”, “abc” and “1Bc”. Default mode is “1Bc”.
Note: If the input field is accepting only digits, only “123” mode will be available.
• “123” Mode: This mode allows to enter digits and . only.
• “ABC” Mode: This mode allows to enter capital letters, digits and symbolic characters.
• “abc” Mode: This mode allows to enter small letters, digits and symbolic characters.
• “1Bc” Mode: This mode allows to enter capital letters, small letters, digits and symbolic
characters.
Following table describes allowed characters for each key.
Key
Description
Key
Description
Key
Description
1
1 Space . : / ‘ ` @ * + - = ,
| & ? ! % ( ) ~ _ < > { } [ ] ^
2
2 A B C a b c
3
3 D E F d e f
4
4 G H I g h i
5
5 J K L j k l
6
6 M N O m n o
7
7 P Q R S p q r s
8
8 T U V t u v
9
9 W X Y Z w x y z
*
*
0
0
#
#
MPK LCD (Available on GRP2614 & GRP2616 only)
The GRP2614 supports MPK LCD with 8 physical MPKs and 3 pages, allowing to configure up to 24 fully
programmable phone extensions to the phone.
Figure 12: GRP2614 MPK LCD
The MPKs can be configured via:
• Web GUI Settings Programmable Keys Physical Multi-Purpose Keys.
• Or from phone directly; by pressing and holding for 5 seconds the MPK button to configure. The phone
LCD and MPK LCD will display related settings as shown below:
Multi-Purpose Keys
Right Key
Left Key

Grandstream Networks GRP2616 Specifications

General

Brand	Grandstream Networks
Model	GRP2616
Category	IP Phone
Language	English