Figure 19: Multiple incoming calls
Notes:
• When there is an ongoing call, users can disable incoming call notification pop up. This way users will
not get disrupted by unexpected popup call but still get notified by the flashing LED. This option can
be enabled from the Web GUI under Settings Call Features.
• For further information, please refer to the admin guide.
Ring Group Call
If the phone is member of a Ring Group, when the SIP server receives a call to the Ring Group extension,
all the phones will start ringing, once a phone answers the call, a missed call notification will be showing on
all the other phones. The GRP261X/GRP2624/GRP2634 Series support reason header, which allows the
phones not to log a missed call if it is answered elsewhere. The following message will be included in the
CANCEL SIP message received by the phone for notifying it that another user answers the call.
Reason: SIP; cause=200;text="Call completed elsewhere"
Do Not Disturb
Do Not Disturb can be enabled/disabled from phone's LCD by following the steps below:
1. Press the Menu button and select "Preference" using navigation keys;
2. Press Menu button again to get into Preference options;
3. When "Do Not Disturb" is highlighted, press Left/Right key to disable/enable DND;
4. Press “Save” softkey to save the change
Users could also enabled/disable DND quickly by pressing the Mute button
To Next Page
Loading...
Need help?
General
