pressing “OK” button.
• Sounds
o Ring Tone
Configures different ring tones for incoming call.
o Ring Volume
Adjusts ring volume by pressing left/right arrow key.
• Audio
o Headset TX gain
Configures the transmission gain of the headset.
o Headset RX gain
Configures the receiving gain of the headset.
• Appearance
o Active LCD Brightness
Adjusts active LCD brightness by pressing left/right arrow key
o Idle LCD Brightness
Adjusts idle LCD brightness by pressing left/right arrow key
o Active LCD Timeout
Adjusts the minute of active backlight timeout.
o Power Saving Timeout
Configures how long to wait before turning off the LCD automatically
during non-office hours. Valid range is 0 to 90.
o Screensaver
Enables/Disables Screensaver
o Screensaver Timeout
Configures the minutes of idle before the screensaver activates.
Valid range is 3 to 60.
• MPK LCD Settings (Available on GRP2614 only)
o MPK LCD Display Order
Choose MPK LCD Display Order whether to be Sequential or
Alternating
o Display Contact on MPK LCD
Enable / Disable Display Contact on MPK Order
• Language and Input
o Display Language
Selects the language to be displayed on the phone’s LCD. Users could
select Automatic for local language based on IP location if available.
To Next Page
Loading...
Need help?
General
