Figure 15: GRP2600 Menu
Characters Input
The GRP261x/GRP2624/GRP263x/GRP2670/GRP2650 keypad can be used by tapping on an input field.
GRP261x/GRP2624/GRP263x/GRP2670/GRP2650 keypad has 4 modes “123”, “ABC”, “abc” and “1Bc”. The default mode is “1Bc”.
“123” Mode: This mode allows to enter digits and . only.
“ABC” Mode: This mode allows to enter capital letters, digits, and symbolic characters.
“abc” Mode: This mode allows to enter small letters, digits, and symbolic characters.
“1Bc” Mode: This mode allows to enter capital letters, small letters, digits, and symbolic characters.
The following table describes the allowed characters for each key.
Note
If the input field is accepting only digits, only “123” mode will be available.