Grant Aerona - Touchscreen Display Operation and Settings; Touchscreen Display Interface Overview

Section 7: Touchscreen Display Operation and Settings Page 23
7.1 TOUCHSCREEN DISPLAY
The display is a capacitive touch screen and parameters are
edited by touching the selected symbol or area on the display
screen.
20.5°C
C
Ground Floor
°
19.0°C
21
.7
19.0°C
A
!
NET
Figure 7-1: Display home screen example
Table 7-1: Touch screen
Number Symbol Description
1
Tap to access Heating circuit controls. Refer to Section 7.3.1.1
2
Tap to access DHW system controls. Refer to Section 7.3.2.1
3 Tap to access Schedule settings for Heating circuit(s), DHW cylinder and Heat Pump. Refer to Section 7.5.
4 Tap to access to Settings menu. Refer to Section 7.9
5
Tap to view Heat pump schematic. Refer to Section 7.6
6 Tap to access active system schematic.Refer to Section 7.7.
7
!
Indicates there are active alarms on the Smart controller.
8
NET
Indicates active connection to EcoNet24 external server.
9
Outdoor temperature value (If outdoor weather sensor support is enabled in the service menu).
Tap to view and amend Smart Controller work mode. Refer to Section 7.3.3.
10
Indicates an active heat demand.
11 Ground Floor Circuit title/name
12 Circuit panes available (if more than 1 installed).
13
Circuit user set value.
14
A
Current circuit work mode. Tap to quick access the circuit work mode screen. Refer to 7.3.1.2 & 7.3.2.2
15
21.7°C
Current circuit temperature. Tap to access Circuit settings. Refer to 7.3.1 & 7.3.2.
16
Tap to move between multiple circuits (if installed) - The touchscreen can also be swiped to change circuits.
1
2
3
6
9
8 107
12
11
16
15
1314
5
4
7 Touchscreen Display
Operation and Settings