Section 12: EC Declarations of ConformityPage 38
12 EC Declarations of Conformity
UKCA - Safety Declaration of Conformity
This declaration is made under the sole responsibility of the following Manufacturer. The
Manufacturer declares that the following product conforms to the requirements of the
UK Legislation and Regulations as detailed below.
The Technical Construction Files are retained at the Manufacturer's location.
Product: Grant Smart Controls
Model: GRANTSMARTCONKIT
In accordance with the following directive(s) or Regulation(s), provided that the products are
installed and used in accordance with our instructions:
S.I. 2016/1101: Electrical Equipment (Safety) Regulations 2016
S.I. 2016/1091: Electromagnetic Compatibility Regulations 2016
S.I. 2012/3032: The Restriction of the Use of Certain Hazardous Substances in Electrical
and Electronic Equipment Regulations 2012
following the provisions of:
BS EN 60730-2-9:2010
BS EN 660730-1:2016-A1:2019
BS EN 50581: 2012
GUK13122023 UKCA DoC GSCK
Grant Engineering (UK) Ltd
Frankland Road | Blagrove | Swindon |SN5 8YG
+44(0)1380 736920 | info@grantuk.com |www.grantuk.com
REGISTERED IN ENGLAND No: 3196757. REGISTERED OFFICE: AS ABOVE
Place of Issue
Date of issue
United Kingdom
13 December 2023
Technical File Compiler and
Authorised Signatory
Neil Sawers
Commercial Technical Manager
To Next Page
Loading...
