GRANULDISK Granule Combi - User Manual

69 pages

Save Page as PDF

To Next Page

Declaration of Conformity

The Manufacturer:

GRANULDISK AB

Jägershillgatan 15

SE-213 75 MALMÖ, Sweden

declares that the following machinery:

The GRANULDISK system Granule Combi

Granule Combi is a unique Combi dishwasher which combines the award winning Granule Optimised

Washing Technology with the traditional dishwashing technique for plates, cutlery and most of the

crockery.

Basic conception

a) is manufactured in conformity with the Svenska Arbetarskyddsstyrelsens Författningssamling

AFS1994:48. This law conforms with the COUNCIL DIRECTIVE of 22 June 1998 concerning harmoni-

sation of member states legislation for machinery (the Machinery Directive 98/37/EG), with particu-

lar reference to Annex 1 concerning the essential health and safety requirements relating to the

design and construction of the machinery.

b) is besides the provisions under a) manufactured according to the following directives: the EC Low

Voltage Directive 2006/95/EC and the EMC Directive 2004/108/EC

c) is manufactured in conformity with the following harmonised standards: EN 60204-1:2006, EN

55014-1, EN 60335-2-58, EN 60439-1, EN 55022, EN ISO 13850:2008, EN ISO 13857:2008,

EN 61000-6-3 and EN 61000-6-2

d) is manufactured in accordance with EN 1717 and fitted with a type AB back flow protection device

with airgap in accordance with EN 13077:2008.

Malmö, Sweden 02.04.2009

Signed on behalf of GRANULDISK AB

GRANULDISK AB Jägershillgatan 15

213 75 MALMÖ

Phone: 040 671 50 60

Fax: 040 21 07 21

...............................................

Peter Schön

President

DRAFT

Other manuals for GRANULDISK Granule Combi

User Manual57 pages

Questions and Answers

R
Ryan RussellAug 30, 2025
What to do if my GRANULDISK Washer basket sensor indicates an error?
- B
  Breanna JonesAug 30, 2025
  If the basket sensor indicates an error, it means the basket sensor that detects the type of basket is indicating an error. Remove the wash basket and run a program. Then, place an empty pot washing basket (round) in the machine and start a program. If the program still doesn't start, contact service personnel.
S
Stephanie BrownAug 29, 2025
What should I do if my GRANULDISK Washer hood doesn't move upwards correctly?
- C
  Christine MilesAug 29, 2025
  If the hood doesn't open on time (longer than 20 seconds), check the incoming water. Reset the alarm by pressing the STOP button. If the alarm continues, contact service personnel.
J
Jasmin AguilarAug 29, 2025
What does it mean if the crush protector has been activated on my GRANULDISK Washer?
- D
  danielstaraAug 29, 2025
  If the crush protector has been activated, it means something is preventing the hood's downward movement. Remove any obstructions that are preventing the hood from moving and reload the wash goods in the basket if necessary. Check the hood motion mechanics.
D
Dorothy BrownSep 12, 2025
What to do if the temperature is not reached in the wash tank of my GRANULDISK Granule Combi Dishwasher?
- M
  Mr. Rodney NelsonSep 12, 2025
  If the temperature is not reached in the wash tank of your GRANULDISK Dishwasher, it may be because the wash water isn't reaching the preset temperature quickly enough after filling. First, reset the alarm by pressing the STOP button. If the problem continues, contact a service engineer.
D
Dawn ChenSep 15, 2025
What to do if the temperature sensor in rinse tank is non operational in my GRANULDISK Granule Combi Dishwasher?
- A
  Anthony MaynardSep 16, 2025
  If the temperature sensor in the wash tank or rinse tank of your GRANULDISK Dishwasher is non-operational (most probably in the rinse tank), it indicates that the temperature sensor in the wash tank or rinse tank is broken. Contact a service engineer for assistance.
S
Stephanie JamesSep 23, 2025
What does it mean if there is a system error and the control card is non operational on my GRANULDISK Dishwasher?
- N
  nfloresSep 23, 2025
  If your GRANULDISK Dishwasher is showing a system error indicating the control card is non-operational, it means a control card component is broken. Contact a service engineer!
J
Joseph DickersonAug 27, 2025
What to do if my GRANULDISK Washer has a long wash tank filling time?
- A
  Allen BarrAug 27, 2025
  If the wash tank filling time is too long, it means the wash tank filling has exceeded its time limit. Check the water supply to the machine and the rinse pump. Clean the rinse nozzles. Reset the alarm by pressing the STOP button. If the alarm continues, contact a service engineer.
J
Jay GoodAug 26, 2025
What to do if my GRANULDISK Washer has a long rinse time?
- C
  Clinton GarzaAug 27, 2025
  A long rinse time indicates that the correct water volume hasn't been reached in time. Begin by cleaning the rinse nozzles. Then, reset the alarm by pressing the STOP button. If the alarm continues, contact a service engineer.
A
amysmithAug 26, 2025
What should I do if the overheating protector for the wash tank tripped on my GRANULDISK Washer?
- V
  Virginia RiveraAug 26, 2025
  If the overheating protector for the wash tank has tripped, interrupting the program, it indicates that the wash tank heater has overheated. Try cleaning the level sensor in the wash tank and then reset the overheat protection. However, if the error reappears within a few hours, it is recommended to contact a service engineer.
M
Monica CaseyAug 25, 2025
What to do if the GRANULDISK Washer has a low water level and foam?
- A
  Alison MercerAug 26, 2025
  If you notice low water level accompanied by foam in your GRANULDISK Washer, it may be due to foam forming in the machine. Avoid using hand washing detergent. Try changing the wash water. If the problem continues, contact your detergent supplier. You can also try resetting the alarm by pressing the STOP button.