CE6000-UM-251-9370 7-26
7 ELECTRICAL ADJUSTMENTS
(5) Press the PAUSE/MENU key at the following menu.
(6) The following menu is displayed, and then press the right arrow key (ADJ).
(7) The following menu is displayed.
(8) Press the up arrow key until the following menu is displayed.
(9) Press the F1 key (X MEDIA SENSOR ADJUST). The following menu is displayed.
Press the F3 (FRONT SENSOR=) or F4 (REAR SENSOR=) to input the recorded adjustment values
if you replace the main board.
Input the recorded adjustment value by using the Up arrow key or Down arrow key with the following
menu.
Press the Left arrow key after input the recorded adjustment values. The following menu is displayed.
To Next Page
Loading...
