How to fix scanned data that is incorrectly aligned on GRAPHTEC CSX500 Scanner?
If the scanned data from your GRAPHTEC Scanner is incorrectly aligned, use the Joint Adjustment function in the driver program (Scanning Master Pro Color driver) to achieve a seamless image.
What to do if the document cannot be fed correctly into GRAPHTEC CSX500 Scanner?
If the document cannot be fed correctly into your GRAPHTEC Scanner, support the document with your hands, lower the scanning speed, or both. If the document has been loaded at an angle, reload the document.
Why do smudges appear in scanned data on GRAPHTEC Scanner?
If smudges not appearing in the original document appear in the scanned data from your GRAPHTEC Scanner, it is because the image scanned has a glossy surface, such as a photograph. Documents with a glossy surface should be scanned by placing them inside the carrier sheet.
How to resolve patchy scanned image data on GRAPHTEC Scanner?
If the scanned image data from your GRAPHTEC Scanner is patchy, perform calibration. Do not use the carrier sheet with color documents.
Why does the color intensity of the image data differ on GRAPHTEC CSX500?
If the color intensity of the image data from your GRAPHTEC Scanner differs, adjust the color using the color-correction function in the driver software (Scanning Master Pro Color). Creased or curled documents should be scanned by placing them inside the carrier sheet.
How to fix document length that differs from the scanned data length on GRAPHTEC CSX500 Scanner?
If the document length differs from the scanned data length on your GRAPHTEC Scanner, adjust the precision by selecting the Distance Correction function in the driver program (Scanning Master Pro Color).
To Next Page
General
