3-4
Settings and Measurement
9. Digital display
Displays the input values for each channel. The SPAN/TRACE/POSITION key is used to change
the display. The and keys or the CH SELECT key can be used to select the active channel
(enlarged display). Moreover, the selected active channel is displayed at the very top of the
waveform display.
For details, see page 3-7.
10. Quick settings
Displays items that can be easily set. The and keys or the CH SELECT key can be used to
make a Quick settings item active and the and keys to change the values.
During Free Running in X-Y display, the pen can be moved up/down and the screen can be cleared.
* During data capture, the SAMPLE item cannot be changed.
11. Alarm display
Displays the alarm output terminal status.
Turns red if an alarm is generated. For the channel that generated the alarm, the input value in the
digital display turns red.
12. Pen display
Displays the signal positions, trigger positions, and alarm ranges for each channel.
13. File name display
Displays the data capture file name during the data capture operation. If auto save is performed,
the progress of data save is displayed with the bar in the background. Displays the data replay file
name during the data replay operation.
CAUTION
Do not turn off the power while the simplified message is "Capturing and Replaying", "Capturing to
Internal RAM", "Capturing to Internal Flash Memory", "Capturing to USB Memory", or "Auto Saving."
Otherwise, the captured data will be destroyed. Make sure that the message is completely gone (wait
for 2 or 3 seconds) before turning off the power. See also "1. Simplified message display."
:
Displays the input values. The input channels to be assigned can be changed using X-Y Display.
: The span of the active channel can be changed using and keys.
: The position of the active channel can be changed using and keys.
: The display of the active channel can turned ON and OFF using and keys.
Trigger position
Stop position
Start position
Alarm range
Rising Falling Win In Win Out
Total size of data to be saved
Size of data that
has been saved
To Next Page
Loading...
