Settings and Measurement
3-5
14. Scale lower limit
Displays the lower limit of the scale of the currently active channel.
15. Waveform display
Displays the waveform of the input signal.
16. Scale upper limit
Displays the upper limit of the scale of the currently active channel.
17. Data capture bar
(1) During data capture
Displays the elapsing time and the remaining capacity of the memory in use. The progress of
data capture is displayed with the bar in the background.
Capacity of memory available for data capture .....
Indicates the capacity of free memory available for data capture at the start of data
capture. For example, if 128 MB of 256-MB memory is already in use, the remaining
128 MB is displayed.
If the data capture destination is the internal RAM, the specified time available for data
capture (see page 3-26) is indicated.
* The maximum value is 2 GB per file. 2 GB is indicated if the capacity of free USB
memory exceeds 2 GB.
Size of data that has been captured .....
Indicates how much of the above memory is currently in use for data capture.
Remaining memory capacity available .....
Indicates how much of the above memory remains available for data capture.
(2) During Data Replay
Indicates the displayed position, cursor position, and trigger position.
(3) Waiting for timer
Indicates the time at which the timer expires.
Capacity of memory available for data capture
Size of data that
has been captured
Elapsed time Remaining time available
If the pre-trigger is set to other than 0% and the size of captured data
has not yet reached the level of the pre-trigger, the time remaining
until it reaches the level of the pre-trigger is displayed in yellow.
Remaining memory
capacity available
(Remaining capacity)
Cursor A position
Trigger point location
Cursor B position
Total size of captured data
Current waveform display position
To Next Page
Loading...
