Settings and Measurement
3-33
(4)-3 TCP-IP Settings
Specifies TCP-IP settings used to connect the GL900 to an Ethernet.
CAUTION
You must restart MT100 after any change is made to a setting value.
Changes are applied upon restart.
(4)-4 USER Settings
(5) OTHR Settings
Other miscellaneous settings are made here.
Setting items Description
IP Address Sets the IP address of MT100 (0 to 255 . 0 to 255 . 0 to 255 . 0 to 255).
Subnet Mask Sets the IP subnet mask of MT100 (0 to 255 . 0 to 255 . 0 to 255 . 0 to 255).
Port Number Sets the port number of MT100 (1024 to 65535).
Gateway Sets the gateway of MT100 (0 to 255 . 0 to 255 . 0 to 255 . 0 to 255).
DNS Address Sets the DNS address of MT100 (0 to 255 . 0 to 255 . 0 to 255 . 0 to 255).
Setting items Description
User Specifies the user name. You cannot set this item when Guest is selected.
Department name Specifies the department name. You cannot set this item when Guest is selected.
Change Conds Switches between Guest, User 1, and User 2.
Since setting conditions are stored for each user, they can be called up easily by simply
switching the user.
To Next Page
Loading...
