Settings and Measurement
3-37
(6)-1 File Replay
Specify a file to replay data in the internal flash memory or USB memory. File replay is explained in
detail on page 3-39.
(6)-2 File Operation
Operate files in the internal flash memory or USB memory. File operation is explained in detail on
page 3-39.
(6)-3 Data Save
Save data remaining in the internal RAM to the internal flash memory or USB memory.
<If the Name Type is Auto> <If the Name Type is User>
(6)-4 Bitmap Save
The GL900 can save a screen copy of waveforms, etc. to a bitmap file. This menu is used to
specify the save destination, file name, etc. of a bitmap file.
<If the Name Type is Auto> <If the Name Type is User>
Setting Description
(1) File Format Sets the file format in which you want to save data.
GBD :
Creates a data file in Graphtec proprietary binary format.
* Prevents tampering of data.
CSV : Creates a data file in a text format.
* Cannot be replayed on the GL900.
(3) Name Type Sets how a data file is named.
Auto :
Automatically gives a name to a file.
Example: 20050101-123456_UG.GBD
Number part ....... Date and time at which a file was created
* In this example, the date is January 1, 2005 and the time is 12:34:56.
UG ..................... User number for data capture
UG (Guest)
U1 (User 1)
U2 (User 2)
GBD ................... Data format
GBD (Binary format)
CSV (Text format)
User : Captures data to a file with a user-defined name.
(3) Folder Specifies a folder to which you want to save data. For details, see the file box on page 3-39.
(4) File Specifies a file to which you want to save data. For details, see the file box on page 3-39.
To Next Page
Loading...
