GRAPHTEC GL900 - Page 70

3-38
Settings and Measurement
(6)-5 Execute
Save a screen copy to a bitmap file. For information on specifying the save destination, see
Section (6)-4, "Bitmap Save".
(6)-6 Save
Save the settings of the GL900.
<If the Name Type is Auto> <If the Name Type is User>
(6)-7 Load
Loads the settings of the GL900 from a file.
Setting Description
(1) Folder Specifies a folder to which you want to save data. For details, see the file box on page 3-39.
(2) File Specifies a file to which you want to save data. For details, see the file box on page 3-39.
(3) Name Type Sets how a data file is named.
Auto :
Automatically gives a name to a file.
Example: 20050101-123456_UG.GBD
Number part ....... Date and time at which a file was created
* In this example, the date is January 1, 2005 and the time is 12:34:56.
UG ..................... User number for data capture
UG (Guest)
U1 (User 1)
U2 (User 2)
BMP .................. Data format (Bitmap file)
User : Captures data to a file with a user-defined name.
Setting Description
(1) Folder Specifies a folder to which you want to save data. For details, see the file box on page 3-39.
(2) File Specifies a file to which you want to save data. For details, see the file box on page 3-39.
(3) Name Type Sets how a data file is named.
Auto :
Automatically gives a name to a file.
Example: 20050101-123456_UG.GBD
Number part ....... Date and time at which a file was created
* In this example, the date is January 1, 2005 and the time is 12:34:56.
UG ..................... User number for data capture
UG (Guest)
U1 (User 1)
U2 (User 2)
CND ................. Data format (Settings file format of the GL900)
User : Captures data to a file with a user-defined name.
Setting Description
(1) Folder Specifies a folder to which you want to save data. For details, see the file box on page 3-39.