Settings and Measurement
3-41
Select [OK] to close the screen.
(8) Text Input
This menu is used to specify the settings of text input operations such as annotation, EU (scaling)
unit and captured data file name input.
• Operation
Operation mode Description Operation method
Text input A Upper case alphabet mode When the cursor key is moved to the uppermost part,
a Lower case alphabet mode operation can be selected using the left/right key.
0 Numeric mode After selecting an operation, use the down key to
+ Symbol mode move the cursor to the desired character.
← Delete mode
↓ Insert mode
OK Finalize mode
When selecting operation Text used for each operation When you bring the cursor to a character and press
ENTER, the character is entered. After you finish
entering characters, move the cursor to OK and
then press ENTER.
To Next Page
Loading...
